Forgive me for the newb question but I am trying to get PIM-DM working and no matter what I try, I cant seem to get it to work correctly. I have a 2930m single switch. I've searched this forum high and low and although I come close to getting it to work. It doesnt. This is what I have so far
ip routing
ip multicast-routing
vlan 10
untagged 1-2,4-47
ip address 10.0.10.1 255.255.255.0
ip igmp
ip pim-dense
ip-addr any
exit
dhcp-server
exit
vlan 20
untagged 3
ip address 10.0.20.1 255.255.255.0
ip igmp
ip pim-dense
ip-addr any
exit
dhcp-server
exit
IP Multicast Route Entries
Total number of entries : 10
Group Address Source Address Neighbor VLAN
--------------- --------------- --------------- ----
224.0.1.129 10.0.10.4 10.0.10.4 10
224.0.1.129 10.0.10.38 10.0.10.38 10
224.0.1.129 10.0.10.220 10.0.10.220 10
224.0.37.42 10.0.10.220 10.0.10.220 10
239.65.67.73 10.0.10.220 10.0.10.220 10
239.195.188.235 10.0.10.220 10.0.10.220 10
239.255.255.250 10.0.10.2 10.0.10.2 10
239.255.255.250 10.0.10.14 10.0.10.14 10
239.255.255.250 10.0.10.200 10.0.10.200 10
239.255.255.250 10.0.10.219 10.0.10.219 10
The last command does not show any neighbors on VLAN 20.
Any tips would be greatly appreciated.
Thank you
Justin
------------------------------
Justin Regan
------------------------------