Cloud Managed Networks

 View Only
last person joined: 22 hours ago 

Forum to discuss all things related to HPE Aruba Networking Central and UXI Network Management, including deployment of managed networks, configuration, best practices, APIs, Cloud Guest, AIOps, Presence Analytics, and other included Applications
Back to discussions
Expand all | Collapse all

Central AOS 8 - 80Mhz wide 6Ghz channels also defaults it for 5Ghz

This thread has been viewed 4 times

  • 1.  Central AOS 8 - 80Mhz wide 6Ghz channels also defaults it for 5Ghz

    Posted 2 days ago

    I want to use 80Mhz wide channels for our 6Ghz radios so I am only setting it up for the 6Ghz radio in the ARM profile and leaving the 5Ghz radio to 20Mhz. 

    The issue is that the 5Ghz radio for some reason is also at 80Mhz even though it is not checked off. 

    In AOS 10 this is not an issue but in AOS 8 Instant it seems to be? 

    Running 8.10.0.13. AP-635s



    ------------------------------
    Aruba Partner Ambassador ACMP, ACDP, ACCP, ACEP
    ------------------------------


  • 2.  RE: Central AOS 8 - 80Mhz wide 6Ghz channels also defaults it for 5Ghz

    EMPLOYEE
    Posted 2 days ago

    There are two options in Central. Both are located in Devices > Config > Radio > RF > ARM > Access Point Control.

    1. Check "Customize Valid Channels" and remove 5 GHz channels with +, E, or S affixes. These are for 40, 80, and 160 MHz channel widths respectively.

    or

    2. Uncheck "Wide Channel Bands" from 5 GHz.


    Original Message