Do you have a Cluster Configured? [Group > Services > Clusters]
What is the status of the the cluster? From one of the controllers - show lc-cluster group-membership
Are they L2-Connected?
------------------------------
If my post was useful, please Accept Solution and Give Kudos.
------------------------------
Zak Chalupka
Principal Engineer - HPE Aruba
ACDX | ACMP | ACSP | ACCP
wifizak@hpe.com------------------------------
Ideas expressed here are solely my own and not necessarily that of HPE Aruba.
------------------------------
Original Message:
Sent: Mar 27, 2024 03:28 AM
From: suryakrish
Subject: CLUSTER SETUP ABNORMAL CONTINUOUS AP FAILOVER
Hi,
This setup is managed by mobility conductor, and the version is 8.10.0.10. I understand the 2S is standby however every minute. I'm observing the AP fails over to another controller and I also have airwave, where the count of down AP showing down and up on every page refreshing.
Original Message:
Sent: Mar 26, 2024 05:52 PM
From: 802.zak
Subject: CLUSTER SETUP ABNORMAL CONTINUOUS AP FAILOVER
What firmware version? Are the controllers Mobility Conductor managed?
An AP with a 2S flag is normal behavior in an health cluster. 2 = IKEv2 and S = Standby [meaning the Active Anchor controller is another controller member]
------------------------------
If my post was useful, please Accept Solution and Give Kudos.
------------------------------
Zak Chalupka
Principal Engineer - HPE Aruba
ACDX | ACMP | ACSP | ACCP
wifizak@hpe.com
------------------------------
Ideas expressed here are solely my own and not necessarily that of HPE Aruba.
Original Message:
Sent: Mar 26, 2024 10:58 AM
From: suryakrish
Subject: CLUSTER SETUP ABNORMAL CONTINUOUS AP FAILOVER
Hi,
I have a 6 nos - controller 7210. Which is under one cluster profile, Recently I have updated the version for all the controllers, currently observing abnormal AP failover continuously, and in airwave, AP down counts is showing up/down, Same observed in controller AP database, going flags 2S .
How can we arrest this? issue? No outages observed, and AP are having long uptime.