Wireless Access

 View Only
last person joined: 18 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Conductor upgrade

This thread has been viewed 4 times

  • 1.  Conductor upgrade

    Posted 6 hours ago

    I upgraded Mobility Conductor and Controllers from 8.6.0.4 to 8.9.0.3 and now the Controllers are no longer communicating with the Conductors. The dashboard of the Conductor is only showing the Controllers but not the Access points or the WLANs details.Post



  • 2.  RE: Conductor upgrade

    Posted 3 hours ago

    Any reason to upgrade to an unsupported release 8.9? I would upgrade to 8.10 first, then start troubleshooting.

    Bit confused as you mention that controllers are no longer communicating with the conductors, but also that they show in the conductor dashboard...



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message