I have not personally used that cable. But I have heard of people successfully using ATEN cables.
------------------------------
If my post was useful, please Accept Solution and Give Kudos.
------------------------------
Zak Chalupka
Principal Engineer - HPE Aruba
ACDX | ACMP | ACSP | ACCP
wifizak@hpe.com------------------------------
Ideas expressed here are solely my own and not necessarily that of HPE Aruba.
------------------------------
Original Message:
Sent: Mar 25, 2024 04:11 AM
From: suternetwork
Subject: Console connection Aruba 6100 over AUX Port
Hello 802.zak
Thanks for your answer.
The customer has already ordered the following cable: https://www.aten.com/global/en/products/usb-solutions/converters/uc232b/
Does it work with that too?
Original Message:
Sent: Mar 22, 2024 11:26 AM
From: 802.zak
Subject: Console connection Aruba 6100 over AUX Port
There a few different cable pin-out conversion options:
HPE Aruba Networking USB-A to RJ45 PC-to-Switch Cable (R9G48B)
HPE Aruba Networking USB-A to RJ45 PIN3TX-6RX Cable (R8Z87A)
We regularly used these cable in our internal lab with Lantronix Console Servers
Here is a thread where a few different console options are discussed:
Aruba CX USB Console Server
------------------------------
If my post was useful, please Accept Solution and Give Kudos.
------------------------------
Zak Chalupka
Principal Engineer - HPE Aruba
ACDX | ACMP | ACSP | ACCP
wifizak@hpe.com
------------------------------
Ideas expressed here are solely my own and not necessarily that of HPE Aruba.
Original Message:
Sent: Mar 22, 2024 08:30 AM
From: suternetwork
Subject: Console connection Aruba 6100 over AUX Port
Hey folks
I support a company that has some Aruba 6100 switches in use.
With this model, console access is solved via USB-C.
I usually use Moxa NPort Serial Device Server for remote access to the console.
Unfortunately, this doesn't work with these switches because they don't have a regular console port.
Is there a way to do this?
Best regards,
Erwin