Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Converting AP-314 from 6.x to 10.x

This thread has been viewed 11 times

  • 1.  Converting AP-314 from 6.x to 10.x

    Posted 13 days ago

    We are currently in the process of installing a new wireless network that is running 10.4 code and managed by Central.  I have a few 314 and 315 APs that are running on our current 6.5 network that I want to migrate to the new network, however I am having trouble finding the process for upgrading these APs from 6.x to 10.x.   Adding to the challenge is they seem to have a different connection for the console so none of my existing console cables will work, limiting the options.   Any suggestions?



  • 2.  RE: Converting AP-314 from 6.x to 10.x

    EMPLOYEE
    Posted 12 days ago

    you need to convert the campus APs to 10.x. firmware

    The process is outlined here 



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message


  • 3.  RE: Converting AP-314 from 6.x to 10.x

    EMPLOYEE
    Posted 12 days ago

    Ariya's link gives overall information for moving to AOS 10, the actual process for getting AOS 10 loaded on the AP is documented in the AOS 10 Adoption Guide portion of the VSG.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------

    Original Message