Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

Converting AP-314 from 6.x to 10.x

This thread has been viewed 12 times
  • 1.  Converting AP-314 from 6.x to 10.x

    Posted Sep 18, 2023 12:47 PM

    We are currently in the process of installing a new wireless network that is running 10.4 code and managed by Central.  I have a few 314 and 315 APs that are running on our current 6.5 network that I want to migrate to the new network, however I am having trouble finding the process for upgrading these APs from 6.x to 10.x.   Adding to the challenge is they seem to have a different connection for the console so none of my existing console cables will work, limiting the options.   Any suggestions?



  • 2.  RE: Converting AP-314 from 6.x to 10.x

    EMPLOYEE
    Posted Sep 18, 2023 07:08 PM

    you need to convert the campus APs to 10.x. firmware

    The process is outlined here 



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------



  • 3.  RE: Converting AP-314 from 6.x to 10.x

    EMPLOYEE
    Posted Sep 18, 2023 09:32 PM

    Ariya's link gives overall information for moving to AOS 10, the actual process for getting AOS 10 loaded on the AP is documented in the AOS 10 Adoption Guide portion of the VSG.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------