Wireless Access

 View Only
last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

CPU2 jiffies have stopped

This thread has been viewed 16 times
  • 1.  CPU2 jiffies have stopped

    Posted Nov 28, 2023 09:48 AM

    I recently had a 575 AP showing as down in AirWave and on the WLC. Looking at the switchport for it the port was Up/Up and the AP was pingable from the WLC and Switch. It was showing "CPU2 jiffies have stopped" in the WLC logs when filtered for that AP. The device was scheduled to be rebooted this morning but to my surprise when going to check on the device it showed a 15 day uptime.

    Any thoughts as to why the device would be getting the error and then randomly come back online without any action taking place? This is the first time this has happened with this AP (and hopefully the only time it occurs).



  • 2.  RE: CPU2 jiffies have stopped

    EMPLOYEE
    Posted Nov 28, 2023 11:10 AM

    CPU jiffies have stopped is not enough to go on for a bug search. What version of code? Is there any crash-info present for the AP? What was the last reboot reason? Check the output of show ap debug system-status ap-name <ap-name> | begin Reboot



    ------------------------------
    Josh
    ------------------------------



  • 3.  RE: CPU2 jiffies have stopped

    Posted Nov 28, 2023 11:38 AM

    There is no reboostrap information and the last reboot reason was "SomeCrash Warm-Reset". It's a 575 on Boot Version 2.5.5.1 and AOS 8.9.0.3.




  • 4.  RE: CPU2 jiffies have stopped

    EMPLOYEE
    Posted Nov 28, 2023 11:53 AM

    There is a bug for the AP-575 with that reboot reason linked to AOS-248121 fixed in 8.10.0.9. https://www.arubanetworks.com/techdocs/ArubaOS/Consolidated_8.x_RN/Content/8.10/09/resolved_8.10.0.9.htm



    ------------------------------
    Josh
    ------------------------------



  • 5.  RE: CPU2 jiffies have stopped

    Posted Nov 28, 2023 12:07 PM

    Good to know that, thank you so much for the info!