Comware

 View Only
  • 1.  Crossover cable required for a OfficeConnect 1920 24G?

    Posted Jun 05, 2017 04:46 PM

    I understand that most devices now a days have autosensing technology built into them however do I need to use a crossover cable to connect my 1920G to another switch (TP 24 port).

    I have tried and it never gets a DHCP address (I am not using the SFP ports). Yet, other systems on the same switch have successfully gotten DHCP addresses.


    #crossovercable


  • 2.  RE: Crossover cable required for a OfficeConnect 1920 24G?

    Posted Jun 05, 2017 09:12 PM

    Requiring a crossover cable is relevant to getting a link up, so a failure to get DHCP doesn't tell you anytyhing about whether you need such a cable.

    When you patch the switches together, do you get a link?



  • 3.  RE: Crossover cable required for a OfficeConnect 1920 24G?

    Posted Jun 07, 2017 05:26 AM

    No need for a cross cable.  The 1920 is default auto-mdi.  This means it tries to "auto-cross" the cable itself if needed during ethernet link negotiation.