Hi.
i have a setup with CX switchen and 802.1x auth with NPS server.
the roles that i have is
port-access role authenticated
stp-admin-edge-port
reauth-period 28800
vlan access 802
port-access role unauthenticated
stp-admin-edge-port
reauth-period 28800
vlan access 803
and config on the port is
interface 1/1/10
description Access-Port-802.1X
no shutdown
vlan access 803
spanning-tree port-type admin-edge
no aaa authentication port-access allow-lldp-auth
aaa authentication port-access client-limit 2
aaa authentication port-access preauth-role unauthenticated
aaa authentication port-access reject-role unauthenticated
aaa authentication port-access auth-role authenticated
aaa authentication port-access dot1x authenticator
the client is not part of the company and external without Wired autocnfig enabled so no 802.1x on client side,
The issue is that the client gets the pre-auth role and after a few minuted it says (se below info) and there is nothing in the Role and satus.
show aaa authentication port-access interface 1/1/10 client-status
Port Access Client Status Details
Client 5c:60:ba:bf:ac:60
========================
Session Details
---------------
Port : 1/1/10
Session Time : 4062s
IPv4 Address :
IPv6 Address :
Device Type :
Authentication Details
----------------------
Status : Authentication Failed, Supplicant-Timeout
Auth Precedence : dot1x - Unauthenticated, mac-auth - Not attempted
Auth History : dot1x - Unauthenticated, Supplicant-Timeout, 3898s ago
Authorization Details
----------------------
Role :
Status :
this is after i shut/no shut
Port Access Client Status Details
Client 5c:60:ba:bf:ac:60
========================
Session Details
---------------
Port : 1/1/10
Session Time : 1s
IPv4 Address :
IPv6 Address :
Device Type :
Authentication Details
----------------------
Status : Authenticating
Auth Precedence : dot1x - Initialized, mac-auth - Not attempted
Auth History :
Authorization Details
----------------------
Role : unauthenticated, Preauth role
Status : Applied
Anyone that had same issue and how is this solved?