Wired Intelligent Edge

 View Only
last person joined: 19 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

CX not sending SNMPv3 Inform requests

This thread has been viewed 0 times

  • 1.  CX not sending SNMPv3 Inform requests

    Posted 7 hours ago

    Hello

    I am trying to configure an Aruba CX switch to send SNMPv3 Inform Requests, but the device doesn't send any data to the SNMP trap receiver (verified by tcpdump)

    ArubaOS-CX Version : Virtual.10.10.0002

    I can generate SNMPv3 traps however. What is the trick to make CX devices send Informs, instead of Traps?

    Is there also a way to force the CX to generate an SNMP warmstart trap?

    snmp-server trap configuration-changes
    snmp-server vrf default
    snmp-server trap-source interface 1/1/1 vrf default
    snmp-server trap snmp authentication coldstart warmstart vrf default
    snmp-server view SNMPV3_ALL iso included
    snmp-server system-location Lab
    snmp-server system-contact Arne
    snmpv3 user SNMPV3_RO_NETMON auth sha auth-pass ciphertext AQBapbVbCcq6qiELSYUwonjd9b6rzAQugfpBEQyIJs1uwfDjHgAAAIB5QOgvsQdNyOpIj7LMQC9aYaCf66KibTXMZLiz4w== priv aes priv-pass ciphertext AQBapSmAKqQqhd3ErJNuje06E6xXOkHFU14EkLCBC0/S2ZqKHgAAACFwX/fm9ES8z/faeHAwTNC5zapZ1mgiwKsKa1C5bw==
    snmp-server host 172.22.128.120 inform version v3 user SNMPV3_RO_NETMON
    snmpv3 user SNMPV3_RO_NETMON view SNMPV3_ALL

    As an aside, I was able to generate SNMPv3 Informs on the Aruba 8.6 Mobility Controller.

    My SNMP trap receiver is the Net-SNMP snmptrapd version 5.9.1