Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Deny All Role on Tunneled SSID 9240 Cluster

This thread has been viewed 13 times

  • 1.  Deny All Role on Tunneled SSID 9240 Cluster

    Posted 2 hours ago

    On two new 9240 Gateways in a cluster, I cannot connect clients to any tunneled SSID. When I connect to the one test access point, I see the client(s) get assigned a Deny All role, and no IP address is assigned either.



  • 2.  RE: Deny All Role on Tunneled SSID 9240 Cluster

    EMPLOYEE
    Posted an hour ago

    when you see clients/users in deny All role, it means that the user-role is not configured correctly. if there is a mis match in user-roles then they are put into deny all.

    check your user-roles. what user role are you putting the tunneled users into?



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message