Hi guys,
I'm trying to discover other vendor wired switches with Airwave 7.7.3. The devices are 3com 4200 or 3com 4500 families with snmpv1 capabilities only. I run several Scans with different set ups on Device Setup > Discover and Device Setup > Communication, while monitoring Airwave interface with tcpdump. The best result I got is snmpv1 request and response with no new device discovered.
I also tried manually addition on Device Setup > Add and got snmpv2 request only.
The command "snmpwalk -c community -v 1 ipaddress" on Airwave console works properly.
Any other ideas?
João