Original Message:
Sent: 3/8/2024 8:55:00 AM
From: schmelzle
Subject: RE: Disable 2.4 Ghz radio
Since this was posted in the Instant discussion. You can do this per SSID in the network configuration. Change the band from All to 5 GHz.
![](https://higherlogicdownload.s3.amazonaws.com/HPE/MessageImages/23ef72419cee4fe881da42bd4bafba68.png)
To turn off the radio entirely for an AP in the cluster, log in to the VC, go to Configuration > Access Points > Select and Edit the target AP > Radio > Turn the respective radio (this may vary depending on the AP model) from Access to Monitor.
![](https://higherlogicdownload.s3.amazonaws.com/HPE/MessageImages/2ffd3105f7e64fe9b207c71b76a8273b.png)
Original Message:
Sent: Mar 07, 2024 09:32 PM
From: Samir Srivastava
Subject: Disable 2.4 Ghz radio
Hi
Kindly guide me for the following
1. How to disable 2.4 GHz radio in an SSID
2. How to disable 2.4 GHz radio in a particular AP of the cluster
------------------------------
Dr.Samir Srivastava
KNIT Sultanpur (UP)
INDIA
------------------------------