Wireless Access

 View Only
last person joined: 17 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Disable and verify BLE, Zigbee on AP and

This thread has been viewed 3 times

  • 1.  Disable and verify BLE, Zigbee on AP and

    Posted 8 hours ago

    As per compliance requirement customer wants to block below and how to verify. 

    ArubaOS (MODEL: Aruba7210), Version 8.10.0.12 LSR

    Aruba AP 655:

    Only SSH Enabled, USB Blocked, Console Port Blocked, BLE Blocked, Zigbee Blocked, E1 Port disable on AP.

    Aruba Controller:

    Disable Telnet Only SSH Enabled, USB Blocked,  Console Port Blocked.



  • 2.  RE: Disable and verify BLE, Zigbee on AP and

    EMPLOYEE
    Posted 6 hours ago

    Probably most of these are answered in the ArubaOS Hardening Guide. Other hardening guides can be found on the support portal.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message