Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

Enable Roaming

This thread has been viewed 51 times
  • 1.  Enable Roaming

    Posted Sep 25, 2023 09:55 AM

    Hello Experts,

    I would like to enable fast roaming for group of AP which already created with around 25 AP and 10 SSIDs.

    To active this I did these steps:
    Configuration--->System--->Profiles--->Wireless LAN--->802.11R 
    Create profile then On virtal AP assigined to SSIDs which I want.  
    I would like to know do I need to do anything else or not ?

  • 2.  RE: Enable Roaming
    Best Answer

    Posted Sep 25, 2023 12:47 PM

    I'd recommend taking a look at the RF and Roaming Optimization for Aruba 802.11ac Networks document.  Client support is going to be hit-or-miss.

    Carson Hulcher, ACEX#110

  • 3.  RE: Enable Roaming

    Posted Sep 25, 2023 08:29 PM

    yes you need to check your client population for fast roaming.

    Here is ipad support 


    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.

  • 4.  RE: Enable Roaming

    Posted Sep 26, 2023 02:02 AM

    Hello Ariya,

    Thanks for sharing this. I will keep in mind.


  • 5.  RE: Enable Roaming

    Posted Sep 26, 2023 02:01 AM

    Hello Carson,

     I will take a look and I will give you the result.