Wired Intelligent Edge

 View Only
last person joined: 11 hours ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.

fault-monitor profile

This thread has been viewed 7 times
  • 1.  fault-monitor profile

    Posted Aug 18, 2022 02:35 AM

    Hello Aruba Community,

    I have got a bunch of "6300M 48SR5 CL6 PoE 4SFP56" and 6300F 24G CL4 PoE 4SFP56 Switches and I would like to enable a fault-monitor profile on every access port.


    Is it wise to enable a fault-monitor profile on every access Port by default, or is it a tool I should just enable for trouble shooting?

    Is there may be a performance issue when enabling a fault-monitor profile on every access port?

    Firmware version on the switch: 10.07.0061

    Default configuration on the Access Port:

        no shutdown

        qos trust dscp

        rate-limit broadcast 100 pps

        rate-limit multicast 100 pps

        description NAC

        no routing

        vlan access 1250

        spanning-tree bpdu-guard

        spanning-tree port-type admin-edge


        port-access onboarding-method concurrent enable

        aaa authentication port-access allow-cdp-bpdu

        aaa authentication port-access allow-lldp-bpdu

        aaa authentication port-access client-limit 8

        aaa authentication port-access preauth-role noaccess

        aaa authentication port-access reject-role noaccess

        port-access allow-flood-traffic enable

        aaa authentication port-access dot1x authenticator



        aaa authentication port-access mac-auth



        client track ip update-interval 60


    fault-monitor profile:

    fault-monitor profile PORT_ERRORS








    May thanks


    Thomas Odermatt