Hi @ all,how can i upgrade the firmaware for a "3com baseline switch 2924-sfp plus / JE002A HP Baseline Smart Gig SFP 24"?I find the files and the guide, but which file must I use for the upgrade and is a TFTP server the only chance to load up the files for use?I find the in the guite the command like:________________________________________________1 To download the runtime application file, enter:upgrade aaa.aaa.aaa.aaa rrr runtimewhere aaa.aaa.aaa.aaa is the IP address of the TFTP server and rrr is thesource runtime filename.2 To download the bootcode file, enter:upgrade aaa.aaa.aaa.aaa bbb bootcodewhere aaa.aaa.aaa.aaa is the IP address of the TFTP server and bbb is the source bootcode filename. The bootcode firmware may not require upgrading for every software upgrade, therefore there may not be a new bootcode file to download.3 To set the switch to boot from the new software you have downloaded, enter the following:rebootThe following prompt displays:Are you sure you want to reboot the system (yes, no):4 Enter yes and press Return. The system reboots the switch.________________________________________________I download the "MIBs-H3C-3Com_V4.0 (155MB)" from:https://h10145.www1.hp.com/downloads/SoftwareReleases.aspx?ProductNumber=JE002A&lang=&cc=&prodSeriesId=&SoftwareReleaseUId=3427&SerialNumber=&PurchaseDate=is this the right file or other one??
And here my Versions:
Runtime version: 01.00.07 ( date 20-Mar-2008 time 16:25:04 )Bootcode version: 18.104.22.168 ( date 17-May-2007 time 12:35:42 )
Thanks in advance and best regards
P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to Comware based. - Hp Forum Moderator
You can try to update by choosing Donwload via HTTP. You can see Source File Name, just select the file as you downloaded.
This steps are at the same page (Restore Image).
Works with HTTP-Upload to V1.00.10, the firmware is only 3.82 MB of size and is available in the HPE networking section:https://h10145.www1.hpe.com/downloads/DownloadSoftware.aspx?SoftwareReleaseUId=9673&ProductNumber=JE002A
Apologies for the necro post, however the above link no longer works, I imagine that's due to moving over to the new forum. Does anyone have an idea of where I could find updated firmware files?
© Copyright 2024 Hewlett Packard Enterprise Development LPAll Rights Reserved.