Wireless Access

 View Only
last person joined: 19 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

gap-db commands not working

This thread has been viewed 10 times
  • 1.  gap-db commands not working

    Posted May 31, 2023 04:43 AM

    Is anyone aware of any known bugs with running gap-db commands? Running 'clear gap-db wired-mac c8:b5:ad:c6:6c:3e' doesn't appear to be removing the entry from the Conductor.

    We have a few hundred APs which need removing from the Conductor GUI which do not seem to budge from running the command above. In theory would running 'ap gap-db re-initialize' remove these stale entries without having to go run a command per MAC address? These entries have been removed from the allowlist and are speaking to a different Conductor completely. 

    Software version: 8.10.0.5 - nothing in the release notes known issues. 



  • 2.  RE: gap-db commands not working

    EMPLOYEE
    Posted May 31, 2023 05:26 AM

    Have you tried to reinitialize the DB?
    https://www.arubanetworks.com/techdocs/CLI-Bank/Content/aos8/ap-gap-db.htm




  • 3.  RE: gap-db commands not working

    Posted May 31, 2023 05:38 AM

    I haven't run this command yet. Which was kind of my question if I should or not. Are you aware of this being service affecting? Or this is purely a db change and will not affect the operation of the APs.