I don't know if my issue is related to your AP issue or not.
However, I face a problem in Ap-325 which is continuously reloading again and again, even after doing the factory reset and assigning a Correct AP name, Master Controller Ip & AP group. Ip it will take automatically from DHCP.
Then I logged a case with Aruba and they told me there was one Bug in the Ap-325 model. I have attached the advisory from Aruba.
Now we take the console and change the AP boot partition from 0 to 1 for quick boot since partition 0 was the IAP firmware version.
If not then,
The command I used to manually push the OS from the Controller is.
apboot> setenv group XXXX
apboot> setenv name XXXX
apboot> setenv master X.X.X.X
used to boot from the Controller on different partitions.
apboot> upgrade os 1 (Controler Master ip):ipq806x
apboot> setenv os_partition 1apboot> saveenv
after that, it reloads 2 or 3 times and then stable.
<<<<< Welcome to the Access Point >>>>>
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.