We had received a new HP 2530 switch J9778A. Can the time be changed from it's webpage or telnet?If so, where is that at?
P.S. this thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to ProCurve / ProVision-Based. - Hp ForumModerator
Check the manual for the various CLI commands https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c03844800
There is a "time" / "timezone" etc. Do not forget to get in config mode and type "time ?" for more help. Usually though the switch gets the time from the network (SNTP).
Alternative go through the "setup" (see manual)
You can do this by login on to the console:
Type :>Clock Set 13:08
Type :>Clock Set 06/11/2015
The manual does seem to completely useless in this respect.
thx , it worked perfectly
Is possible sincronize the time With SNTP Server in this model?
Thanks from SPAIN!
GordoSani'm just registred to say thanks.
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.