Hello,
I have a vlan 1 and vlan 120 on my network.
VLAN 1 is my client & server lan , with dhcp etc... for example : 172.16.1.0/24
Vlan 120 IP Network is : 10.0.120.0/24 with gateway on my FireWall Interface : i Use it for manage my network devices.
i Already have 2 aruba CX6100 connected to each other by this configuration :
These 2 Switchs are reachable by their IP , for example : 10.0.120.1 and 10.0.120.2 : Work Fine.
And when i connected a device on one of this switch on an unttagged port vlan 1 : i get connected with my server DHCP etc.... : Work Fine
I just bought a new Aruba Instant On 1930 , i set this ip to 10.0.120.3, i connected it on the port 18 of the first CX6100 Switch to port 48 of the new one.
I set up the port 18 from the CX6100 like that ( same config as port 28) :
And the port 48 of the new switch like that :
With this configuration i can't reach the new switch with this IP : 10.0.120.3 :( ping and http doesn't work.
I don't see what i've missed ?
Any idea ?
Thank's