I need to configure an ArubaOS-CX Switch(6000-series) for MSTP.
We use four instances with some vlan ranges in our current setup, but "spanning-tree instance x vlan y" only allow one vlan per command. I need to setup ranges of hundreds of vlans.
On an aruba 2930 it looks like:
spanning-tree instance 1 vlan 120-147 149-254
spanning-tree instance 2 vlan 1000-1199 1600-1699 1701-1705 1710 1711
spanning-tree instance 3 vlan 105 107
spanning-tree instance 4 vlan 148
How may I tell spanning-tree instance a range?
Any help will be appreciated
The config with the range of vlans for each mstp instance should be the same - the only difference is that you should use commas and no empty spaces between the integers. Here an example:
spanning-tree instance 2 vlan 1000-1199,1600-1699,1701-1705,1710,1711
spanning-tree instance 1 vlan 120-147 149-254spanning-tree instance 2 vlan 1000-1199 1600-1699 1701-1705 1710 1711spanning-tree instance 3 vlan 105 107spanning-tree instance 4 vlan 148
works! Thanks a lot.
It's not documented in CLI guider or interactive help.
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.