Comware

 View Only
last person joined: 2 days ago 

HP 10508 Switch - No Web GUI?

This thread has been viewed 0 times
  • 1.  HP 10508 Switch - No Web GUI?

    Posted Sep 05, 2014 11:53 AM

    Greetings All,

     

    We recently migrated from the older 3Com S7903E to a new HP 10508 switch.

     

    One thing I noticed is that there doesn't seem to be a command to enable Web Interface (ip http enable).

     

    The software version for the new switch is per the details below:


    HP Comware Software, Version 7.1.035, Release 2105P05
    Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
    HP 10508 uptime is 25 weeks, 1 day, 23 hours, 10 minutes
    Last reboot reason : Warm reboot

    Boot image: flash:/10500-CMW710-BOOT-R2105P05.bin
    Boot image version: 7.1.035P22, Release 2105P05
    System image: flash:/10500-CMW710-SYSTEM-R2105P05.bin
    System image version: 7.1.035, Release 2105P05


    We spoke to the HP engineer who helped in in the migration and he said he was able to apply "ip http enable" via command line on a 10500 using Comware 5 software. I'm not sure either way.

     

    Any insight would be appreciated.

    Thanks!


    #10508
    #Management
    #10500