Thank you for your feedback.
do you have a tutorial to follow to update the firmware please knowing that I can't access through the console only?!
Original Message:
Sent: Nov 30, 2023 06:03 AM
From: frmeunier
Subject: HP-1910-48g-switch-jg540a
Hello
Last firmware version is R1519P06
It's downloadable from Aruba Support Portal : https://asp.arubanetworks.com
(Create an account if needed, to access
The Release Notes describe the method for upgrading software from Boot ROM menus (Appendix B, you will need a TFTP server on your machine)
------------------------------
Frederic MEUNIER
Original Message:
Sent: Nov 29, 2023 01:40 AM
From: Hamza BATTIKH
Subject: HP-1910-48g-switch-jg540a
My HP switch 1910-48 JG540A won't boot . i've tried to reset it but i get this answer :
Password recovery capability is enabled. To perform this operation, first
disable the password recovery capability using the undo password-recovery
enable command in CLI.
so i put "Skip Current System Configuration " and i reboot i get this answer :
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/JG540A-CMW520-R1106.bin!..
............................................................................
.................
The main application file is invalid!
Starting to get the backup application
file--flash:/JG540A-CMW520-R1106_bak.bin!
The backup application file does not
exist--flash:/JG540A-CMW520-R1106_bak.bin!
Starting to get the secure application file--flash:/secure.bin!
The secure application file does not exist--flash:/secure.bin!
Booting App fails!
i want to update the firmware but i I can't find the firmware on the website .
https://h10145.www1.hpe.com/support/SupportLookUp.aspx
can some one help me please ?!
Thanks