So have two VLANs configured on my switch, the default VLAN for data, and a VLAN2 for voice. I was troubleshooting the VLAN with a laptop and if I tag a port for VLAN 2, I can get network/internet connectivity on the laptop as long as I enable VLAN and set VLAN 2 on the laptop NIC. If I try to put in a Cisco VoIP (SPA501G) on that port, I don't get any connectivity. Going through the configs, the phone pulls the proper VLAN2 network configurations using IP-Helper, but not VLAN information. I've tried enabling CDP but no luck. Any thoughts would be greatly appreciated.
Nevermind, problem solved!
Hi, try this:
qos dscp-map 101110 priority 6
qos type-of-service diff-services
qos dscp 101110
Also enable lldp-med run
perhaps this helps you ...
I have hp 2530 that I want to configure it to use IP phone and Wifi ,its currently a flat switch.
Please help, I not clued up HP's
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.