i need to configure device that requerd dhcp, but in my case i need that if some device connect to port it always taking that ip addres that i config
in port 1/0/1- that ip will be 192.168.1.1
in port 1/0/2- that ip will be 192.168.1.2
(dhcp static in not a reallty option) , i usead Hp 5500 comware 7
thanks for help (:
Since (MAC Address) DHCP Static Binding is out of question...a way to apply a dynamic (but which doesn't change over time) IP Address allocation on a Interface is to do a trick: probably two different IP Pools (each one with just one IP Address, respectively, 192.168.1.1 and 192.168.1.2 referenced by two differents DHCP IP Pools) assigned, each one, to required interface.
dhcp server apply ip-pool pool-for-1-0-1
dhcp server apply ip-pool pool-for-1-0-2
where pool-for-1-0-1 and pool-for-1-0-2 have two differents one-IP-Address addresses ranges (if possible):
pool-for-1-0-1: address range 192.168.1.1 192.168.1.1
pool-for-1-0-2: address range 192.168.1.2 192.168.1.2
That's teorethical...to be verified.
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.