Wired Intelligent Edge

Hi,

I have a HP 6600-24XG (J9265A) switch, it has 24 SFP+ 10G ports, I need to get a 1000BASE-T via copper RJ-45.

I have seen these transceivers:

• HP X121 1G SFP RJ45 T Transceiver J8177C
  I believe this is not compatible with 24XG, but it is with 24G-4XG for example.
  
  
• https://www.fs.com/products/66617.html
• https://www.sfpcables.com/sfp-copper-transceiver-10gbase-t-cat-6a-7-20m/

Will any of these two RJ-45 SFP+ 10G work? As I don't see anything related to 1000BASE-T on the 24XG QuickSpecs document.

Thanks!

Hi,

As per the this product quick specs, below are the supported transceivers. Regarding the 3rd pary tranceivers, generally HP/HPE does not garantee the functionality of the SFP.

Quick specs: https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04111706.pdf

HP 6600-24XG Switch J9265A
 24 open 10-GbE SFP+ transceiver slots
 min=0 \ max=24 SFP+ Transceivers

 

Note 1
The following SFP+ Transceivers install into this switch:
HP X132 10G SFP+ LC ER Transceiver J9153A
HP X132 10G SFP+ LC LR Transceiver J9151A
HP X132 10G SFP+ LC LRM Transceiver J9152A
HP X132 10G SFP+ LC SR Transceiver J9150A
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable J9281B
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable J9283B
HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable J9285B
HP X244 10G XFP to SFP+ 1m Direct Attach Copper Cable J9300A
HP 10G X244 XFP to SFP+ 3m Direct Attach Copper Cable J9301A
HP 10G X244 XFP to SFP+ 5m Direct Attach Copper Cable J9302A
HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable J9286B
HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable J9287B

Note 2

The following SFP Transceivers install into this switch:
HP X121 1G SFP LC SX Transceiver J4858C
HP X121 1G SFP LC LX Transceiver J4859C
HP X121 1G SFP LC LH Transceiver J4860C
HP X112 100M SFP LC BX-D Transceiver J9099B
HP X112 100M SFP LC BX-U Transceiver J9100B
HP X122 1G SFP LC BX-D Transceiver J9142B
HP X122 1G SFP LC BX-U Transceiver J9143B
HP X111 100M SFP LC FX Transceiver J9054C