Wired Intelligent Edge

 View Only
last person joined: 14 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

HP E2610-24 (J9085A) configuration

This thread has been viewed 0 times

  • 1.  HP E2610-24 (J9085A) configuration

    Posted Jul 06, 2011 03:31 PM
      |   view attached

    Hello!

    How I can configure HP ProCurve E2610-24 (J9085A) in this network: (click to view real photo)


    #configuration
    #E2610-24
    #J9085A
    #ProCurve
    #HP


  • 2.  RE: HP E2610-24 (J9085A) configuration

    Posted Jul 08, 2011 08:26 AM

    Obviously, you'll need to turn on IP routing on the switch ("ip routing").  You'll need a VLAN for each server, and an IP address for each VLAN ("vlan XX; ip address 217.48.10.1/30; exit").  Then you'll need to add a static route for 80.48.20.0/24 via the server address (presumably 217.48.10.2/30) on 217.48.10.0/30 ("ip route 80.48.20.0/24 217.48.10.2"), and one for 80.48.21.0/24 via 217.48.10.4/30 and so on for the rest of the links.  (See the manuals for exact syntax on the commands in brackets.)

     

    Try to make your VLAN numbering scheme somehow match your subnets, for easy remembering.  e.g. You might use VLAN 21 for 80.48.21.0/24 and VLAN 24 for 80.48.24.0/24.