Wired Intelligent Edge

 View Only
last person joined: 20 hours ago 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

HP Procurve Switch 2530 Can't open web interface

This thread has been viewed 2 times

  • 1.  HP Procurve Switch 2530 Can't open web interface

    Posted Apr 24, 2014 08:29 AM

    Hi all,

     

    For some reason I can't open HP switch web interface. I've just connected it for  the first time to the production  network, it got an IP from DHCP but can't open web interface. Telnet works fine.  Any help?

     

    Kind Regards,

     

    Dmitri

     

     

    P.S. This thread has been moevd from Switches, Hubs, Modems (Legacy ITRC forum) to ProCurve / ProVision-Based. - Hp Forum Moderator


    #EWS


  • 2.  RE: HP Procurve Switch 2530 Can't open web interface

    Posted May 06, 2014 08:25 AM
    Is webmanagement enable???
    If not, type this in a telnet session.

    conf t
    webmanagement


  • 3.  RE: HP Procurve Switch 2530 Can't open web interface

    Posted Jul 30, 2017 01:55 AM

    Web Management for HTTP is already enabled but still not allowing me to access switch to the graphical interface.



  • 4.  RE: HP Procurve Switch 2530 Can't open web interface

    Posted Jun 12, 2018 12:50 PM

    Thank you dhoenel 

    It's Works for me on 2910al switch



  • 5.  RE: HP Procurve Switch 2530 Can't open web interface

    Posted Aug 21, 2017 08:48 PM

    Hi Dmitri,

    Check that you're using a supported web browser.  Generally speaking the switch web UI supports only the latest two versions of Chrome, Firefox, Safari (on MacOS), and IE.

    Regards,

    SVB