HI there.
I have two IAP 135, running version 6.3.1.4
The IAPs have been configured with the following static ip address:
- IAP 1: 192.168.10.4
- IAP 2: 192.168.10.5
- Virtual Controller IP: 192.168.10.3
Every thing works great, except for the radius authentication.
Our radius servers are two windows 2008r2 running NPS. It also works very fine and it has been used for lot a authentications on other devices.
The problem is: The IAPs GUI keeps alerting that the radius servers are down ( messages attached ): "Authentication Server Radius1-ServerSync is down", but they are not, they are up and responding very well.
Because of that, a lot of authentications fail without even hit the radius servers.
To make it work, I have to wait ( for the radius dead time ), and try again a lot of times.
When the authentication request hits the radius servers, it works. But the a lot of those auth requests doesnt even reach the NPS server. And again, the radius servers are up and working great.
The IAPs logs shows the message: ( attached )
Hope you guys can help me again.
Thanks a lot