We just changed switches from a Nortel 450 to a Meraki MS120.
I have an SSID with dynamic VLAN assignment as follows :
For some reason vlan 1800 isn't being assigned, and I'm getting the following error:
Devices that are being assigned to vlan 2370 are getting through.
I've verified the trunk port on the Meraki is correctly set up, and it's uplink is setup with the appropriate vlans being allowed on the trunks. This is occurring on all the access points we have connected to Meraki switches. Working perfectly fine on our avaya/extreme/cisco switches. Anyone know if there is something specific about the Meraki switches that needs to be configured for dynamic vlan assignment to work?