Hi Everyone,
Currently deploying new Aruba 6200F CX switches for a client. The client runs Kramer AV equipment and the maintainer has sent a doc containing the requirements. Most of the requirements are not new to me and although IGMP is not new to me either, finding the Cisco equivalent syntax for Aruba is proving quite difficult (their doc is Cisco Small Business switch specific). The features that I need to enable to satisfy their requirements are:
- Port Auto Learn
- Immediate Leave
- Query Status
- Query Election
- Bridge multicast filtering
So far I have enable IGMP etc on the VLAN interface for this equipment and my config looks like the following:
interface vlan20
no shutdown
ip address x.x.x.x/24
ip igmp enable
ip igmp version 2
ip igmp querier
ip igmp querier interval 5
ip igmp robustness 5
ip igmp last-member-query-interval 2
ip igmp query-max-response-time 50
ip igmp static-group 239.1.1.1
Unfortunately I am struggling to understand if the above config covers off the features mentioned above.
Would anyone have any thoughts?
Thanks
Barry