Network Management

 View Only
last person joined: 6 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

IMC Deploy Device Software via OOBM

This thread has been viewed 2 times

  • 1.  IMC Deploy Device Software via OOBM

    EMPLOYEE
    Posted Jan 12, 2017 08:10 AM

    Trying to deploy new software to HPE 6600ml-48G-4XG Switch via the OOBM interface.

    Result shows "Script exist error".

    Details show......

    G25HP6600a# copy tftp flash 10.50.15.155 10.3.79.250_K_15_18_0014.swi primary allow-no-signature
    The primary image will be deleted.

    Continue (y/n)? y
    000M Peer unreachable.

    I think the problem is that the "script" is trying to access the switch by not using the OOBM interface, which is the only IP interface on the switch. The command must have OOBM appended to the end of the string in order to be successful.

    Is there some means within IMC to tell it to access these OOBM type switches via this interface when gaining access?

     


    #imc
    #oobm


  • 2.  RE: IMC Deploy Device Software via OOBM

    EMPLOYEE
    Posted Oct 01, 2019 03:48 PM

    I'm seeing the same behaviour on IMC 7.3 with a 5406R switch, OOBM interface is the only accessible interface to IMC. Anyone have a suggestion?



  • 3.  RE: IMC Deploy Device Software via OOBM

    MVP GURU
    Posted Oct 02, 2019 05:36 AM
    @TomWn wrote: ...OOBM interface is the only accessible interface to IMC...

    Is the OoBM IP address reacheable by IMC and vice versa? are IMC and the OoBM on the same subnet?



  • 4.  RE: IMC Deploy Device Software via OOBM

    EMPLOYEE
    Posted Oct 08, 2019 01:46 PM

    Yes, the IMC system is reachable ONLY via the OOBM interface. Ping works when specifying the OOBM interface as the source. Additionally, when manually running the "copy ..." command with an appended OOBM at the end, it can reach the IMC system as expected.

    *edit* forgot to mention, they are on the same /16 subnet, no routing involved.

     

     



  • 5.  RE: IMC Deploy Device Software via OOBM

    Posted May 12, 2021 08:59 AM

    Hi,

    I am trying to deploy 3810M firmware via oobm with E0705P10.

    The problem is the same.

    There is no adapter for 3810M sysoid : 1.3.6.1.4.1.11.2.3.7.11.174.1

    IMC uses the files in the directory : /opt/iMC/server/conf/adapters/ICC/Hewlett Packard/HPProcurve2500

    I tried grep oobm in /opt/iMC/server/conf/adapters/ICC/Hewlett Packard/

    oobm is not implemented

    copy tftp flash XXXXXXXXXX_KB_16_10_0013.swi primary
    The primary image will be deleted.

    Continue (y/n)? y
    000M Peer unreachable.

    IMC and Switchs are in the same VLAN.

    Is there anything new about this issue?

     

    Thank you.