Network Management

 View Only
last person joined: 7 hours ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

iMC NQA Issue (Need Help)

This thread has been viewed 0 times

  • 1.  iMC NQA Issue (Need Help)

    Posted Oct 04, 2016 02:34 AM

    Hi Everyone,

    I have difficult on iMC NQA part.
    Auto discovered network switch , had few model such as 5800 , 5500 , 5130 and 5120.
    Not all of em fall into NQA devices , but all 5130 switch model doing manually/add manually , it shows "NQA not supported device"
    Attachment : 
    5130-10.32.1.3-NQA_NOT_SUPPORTED.pngScreenshot from 2016-10-04 12-38-58.png

    Anyone could able to help me out of this? Is about firmware too low or iMC really lack of 5130 supports?


    #nqa
    #imc


  • 2.  RE: iMC NQA Issue (Need Help)

    EMPLOYEE
    Posted Oct 04, 2016 10:54 AM

    Hello,

    The R3106 SW code is the original production software image from when the switch was launched so it could do with an upgrade to the latest and greatest as a matter of course to pick up any bug fixes and additions to the feature-set. There has been a lot of work gone into the PoE modules for example as well as supporting additional RADIUS extensions for CoA support.

    Furthermore - which version of iMC are you using are you bang up to date on that front. You might s well be proactive as supoprt will ask you to update to the latest anyhoo. 

    many thanks

    Ian