Network Management

 View Only
last person joined: 2 days ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

iMC PLAT 7.3 (E0708P02) - The stack number 1 is deleted from the stack configuration

This thread has been viewed 14 times

  • 1.  iMC PLAT 7.3 (E0708P02) - The stack number 1 is deleted from the stack configuration

    Posted Jun 09, 2023 03:56 AM

    Hi,

    I have a problem with iMC and this alarm : The stack number 1 of device 172.xxx.xxx.xxx is deleted from the stack configuration

    This alarm is triggered on Cisco C9200

    I have checked the switch configuration and it's OK

    Have you got an idea ?

    Thk,

    Cyrille



  • 2.  RE: iMC PLAT 7.3 (E0708P02) - The stack number 1 is deleted from the stack configuration

    Posted Apr 17, 2024 04:50 AM

    Did you fiund what is causing this ? I have the same issue on Cisco C9300 stack


    Original Message


  • 3.  RE: iMC PLAT 7.3 (E0708P02) - The stack number 1 is deleted from the stack configuration

    Posted Apr 17, 2024 04:58 AM

    Hello,

    No, I did not found what is causing this

    Cyrille


    Original Message


  • 4.  RE: iMC PLAT 7.3 (E0708P02) - The stack number 1 is deleted from the stack configuration
    Best Answer

    Posted May 07, 2024 03:57 AM

    Hi Cyrille,

    I my case it solved the problem by deleting Cisco stack from IMC and add it again. 

    Rgds,

    Jesper


    Original Message


  • 5.  RE: iMC PLAT 7.3 (E0708P02) - The stack number 1 is deleted from the stack configuration

    Posted May 08, 2024 10:00 AM

    Hi Jesper,

    Thanks for your reply, I have tested and it's the solution for me too !

    Regards,

    Cyrille


    Original Message