Comware

hello

I am totally new and novices for vlan.  can anyone please advise if this can work and how do i achieve it.  thanks!

i have 2x procurve 3800 48 port switch, connect via stacking module and stacking cable.  that give me a total of 96 ports.

I like to create 3 vlans

vlan 1 - servers, gateway and printers 

vlan 2 - pc and notebook (get dhcp from server in vlan 1)

vlan 3 - smartphone and tablet (get dhcp from server in vlan 1)

while the default vlan already assing to vlan 1, i created vlan 2 and vlan 3 as follows

vlan 1- 192.168.10.0/24, gateway 192.168.10.1 - my internet gateway

vlan 2 - 192.168.20.0 /24 , gateway 192.168.20.1 - vlan 2 gateway

vlan 3 - 192.168.30.0/24, gateway 192.168.20.1 - vlan 3 gateway

my problems...

1. In vlan 2 and 3, unable to get ip from dhcp server in vlan 1

2. so i set static ip for some PC...eg 192.168.20.20/24, gateway 192.168.20.1, i can ping to vlan 1 host, but i can access internet. i had verify servers in vlan 1, they have not problem access internet, just that the gateway is 192.168.10.1. I must have missing something.

3. do i need a "interface vlan" (eg vlan 4) to do the routing? if so, how to?

Hello

ip you wantvlan 2 and 3,to  get ip from dhcp server in vlan 1, go inside the vlan 2 and 3 and put this command:

ip helper-address 192.168.10.xxx (dhcp server Ip)