First time posting here, so thanks in advance for your feedback.
Our setup is as follows:
Controller --> AP ---wireless----> wireless bridge(Linksys) ----wired-----> end user device
2 SSID, eg. X and Y, on the same VLAN/subnet.
Wireless bridge when configured on SSID X previously and is working fine in terms of connectivity, however we are trying to phase out SSID X, and move onto SSID Y.
I have noticed that 'some' floors when connected with SSID Y, are not able to connect. When I connect my laptop to the wireless bridge on SSID Y, I am not getting IP address. However, exact same setup in some location is working on SSID Y.
The wireless bridge is a dummy device, the only thing configured there is the SSID, no layer 2/3 capability.
Thanks for your help.