Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.

Intermittent IP via wireless bridge on certain floors.

This thread has been viewed 4 times
  • 1.  Intermittent IP via wireless bridge on certain floors.

    Posted May 22, 2023 01:52 PM

    Hi there,

    First time posting here, so thanks in advance for your feedback.

    Our setup is as follows:

    Controller --> AP ---wireless----> wireless bridge(Linksys) ----wired-----> end user device

    2 SSID, eg. X and Y, on the same VLAN/subnet.

    Wireless bridge when configured on SSID X previously and is working fine in terms of connectivity, however we are trying to phase out SSID X, and move onto SSID Y.

    I have noticed that 'some' floors when connected with SSID Y, are not able to connect.  When I connect my laptop to the wireless bridge on SSID Y, I am not getting IP address.  However, exact same setup in some location is working on SSID Y.

    Any ideas? 

    The wireless bridge is a dummy device, the only thing configured there is the SSID, no layer 2/3 capability.

    Thanks for your help.