Hi there,First time posting here, so thanks in advance for your feedback.Our setup is as follows:Controller --> AP ---wireless----> wireless bridge(Linksys) ----wired-----> end user device2 SSID, eg. X and Y, on the same VLAN/subnet.Wireless bridge when configured on SSID X previously and is working fine in terms of connectivity, however we are trying to phase out SSID X, and move onto SSID Y.I have noticed that 'some' floors when connected with SSID Y, are not able to connect. When I connect my laptop to the wireless bridge on SSID Y, I am not getting IP address. However, exact same setup in some location is working on SSID Y.Any ideas? The wireless bridge is a dummy device, the only thing configured there is the SSID, no layer 2/3 capability.Thanks for your help.
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.