Guys,
I have configured the controller to have a default gateway pointing to my switch. The switch and router are configured to let out vlans 200 and 300. I tested connectivity to the internet from the switch and all is well. Problem is that I cannot get access to the internet from the controller itself. I have also noticed that the route keeps bouncing back the controller IP (200) and the default gateway (4)
What am i doing wrong?
(Aruba3200-Test) #traceroute 87.250.250.203
Press 'q' to abort.
Tracing the route to 87.250.250.203
1 10.2.221.4 0.846 msec 0.62 msec 0.609 msec
2 10.2.221.200 0.687 msec 0.801 msec 0.591 msec
3 10.2.221.4 1.4 msec 3.654 msec 0.764 msec
4 10.2.221.200 0.698 msec 0.684 msec 0.746 msec
5 * * 10.2.221.4 0.948 msec
6 10.2.221.200 0.793 msec 0.729 msec 0.752 msec
7 * 10.2.221.4 1.039 msec *
8 10.2.221.200 1.079 msec 0.854 msec 0.843 msec
9 10.2.221.4 1.076 msec * 1.249 msec
10 10.2.221.200 0.848 msec 0.875 msec 0.799 msec
(Aruba3200-Test) #show ip route
Codes: C - connected, O - OSPF, R - RIP, S - static
M - mgmt, U - route usable, * - candidate default
Gateway of last resort is Imported from DHCP to network 0.0.0.0 at cost 10
Gateway of last resort is Imported from CELL to network 0.0.0.0 at cost 10
Gateway of last resort is Imported from PPPOE to network 0.0.0.0 at cost 10
Gateway of last resort is 10.2.221.4 to network 0.0.0.0 at cost 1
S* 0.0.0.0/0 [1/0] via 10.2.221.4*
C 10.2.221.0 is directly connected, VLAN1
C 10.10.100.0 is directly connected, VLAN100
C 10.10.200.0 is directly connected, VLAN200
C 10.10.30.0 is directly connected, VLAN300