Comware

 View Only
last person joined: yesterday 

Back to discussions
Expand all | Collapse all

Issue assigning an IP on int GE0/1 on MSR954 router

This thread has been viewed 0 times

  • 1.  Issue assigning an IP on int GE0/1 on MSR954 router

    Posted Apr 23, 2017 03:37 PM

    Hello everyone!

    Could someone help me out and explain why Comware 7 on MSR954 JH297A router refuses to accept IP ADDRESS command to assign an IP to GE0/1 yet every available manual assures that's the way to do it?

    SY

    INT G0/1

    IP ADDRESS 192.168.3.1 255.255.255.0

    <Unregonized command found at '´`' postion>

    I can't assigne an IP just by IP SOURCE BIND IP-ADDRESS 192.168.3.1

    I'm just desperate.

     


    #comware7
    #Interface
    #MSR954


  • 2.  RE: Issue assigning an IP on int GE0/1 on MSR954 router

    Posted Apr 23, 2017 04:45 PM

    Solved the issue - GE0/1 was in PORT LINK-MODE BRIDGE (LAYER2).

    Must have been set to PORT LINK-MODE ROUTE (LAYER 3).

    All is there just the manuals don't specify you have to be careful with PORT LINK-MODE.

    Wasted 2 days on this issue. Hoped to finish config on the router over the weekend.