Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

issues with IP mobility with 6.3.1.2.

This thread has been viewed 0 times

  • 1.  issues with IP mobility with 6.3.1.2.

    Posted Feb 05, 2014 02:14 AM

    I have a working IP mobility setup in 6.2.1.4. When i upgrade to 6.3.1.2 my IP mobility is not working. I see the HAT table is fine. I am new IP mobility ? May i know what i am suppose to check.

     

     

    6.2.1.4  working fine - output

     

    5.5.5.2 is the client IP address

     

    4306) (config) #show ip mobile trail 5.5.5.2

    Station location trail list, 2 location(s)
    ------------------------------------------
    Master-AP on switch 172.5.0.1 Station 5.5.5.2
       Roaming Status: Home Switch/Home VLAN, started Wed Feb  5 14:28:36 2014
       Local VLAN 5, ip-mobility/00:1a:1e:57:a6:e0/g
    Local-AP on switch 192.168.10.1 Station 5.5.5.2
       Roaming Status: Mobile IP Binding (Away), started Wed Feb  5 14:40:49 2014
       Local VLAN 2, ip-mobility/00:24:6c:25:5a:a8/a

     

    Please advice what i am suppose to check or configure on 6.3.x if required ?



  • 2.  RE: issues with IP mobility with 6.3.1.2.
    Best Answer

    Posted Feb 08, 2014 10:37 PM

    i Was able to resolve the issue myself thank you.



  • 3.  RE: issues with IP mobility with 6.3.1.2.

    Posted Feb 09, 2014 12:42 AM

    Can you let us know what you did to resolve your issue?



  • 4.  RE: issues with IP mobility with 6.3.1.2.

    Posted Feb 09, 2014 07:55 PM

    I added all the controller's IP address participating in active-domain to HAT Table.