Controllerless Networks

ย View Only
last person joined: 21 hours ago 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Expand all | Collapse all

Link pool dhcp with ssid

This thread has been viewed 20 times
  • 1.  Link pool dhcp with ssid

    Posted 9 hours ago

    Hello friends


    i have controller aruba 7010 with 14 Access Point , 14 SSID

    i have pool dhcp (Pool_Users) 172.16.11.0/24 linked 14 ssid in vlan11

    i want creat new Vlan50 subnet (172.16.50.0/24)

    i want creat new pool dhcp (Pool_New) linked 172.16.50.0/24 in Vlan50 

    Total:
    Each AP has two SSID

    14 SSID : in Vlan 11 You take an IP from 172.16.11.0/24
    14 SSID : in vlan 50 You take an IP from 172.16.50.0/24


    Is this possible how to do this?

    Thanks in advance




  • 2.  RE: Link pool dhcp with ssid

    EMPLOYEE
    Posted 7 hours ago

    If you are asking if you can have a single AP broadcast the same SSID twice, no, at least not on the same radio.

    If you are trying to add another VLAN to an existing WLAN, just create a VLAN pool with both VLANs specified and assign the pool to the WLAN.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------



  • 3.  RE: Link pool dhcp with ssid

    Posted 7 hours ago

    No same SSID

    I want to creat two SSID in Each AP

    Link ssid1 with vlan11 Pool_dhcp11

    Link ssid2 with vlann50 Pool_dhcp50




  • 4.  RE: Link pool dhcp with ssid

    EMPLOYEE
    Posted 7 hours ago

    Yes.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------



  • 5.  RE: Link pool dhcp with ssid

    Posted 7 hours ago

    Is this possible how to do this? pleez๐Ÿ™๐Ÿ™




  • 6.  RE: Link pool dhcp with ssid

    EMPLOYEE
    Posted 6 hours ago

    There are multiple guides/videos/whatever on how to setup the WLAN already available.  You aren't asking for anything special or different, this is just a standard WLAN.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------



  • 7.  RE: Link pool dhcp with ssid

    Posted 6 hours ago

    I know how to create pools Dhcp, Vlans and ssid wlan...

    The connection must be between Access Point and Port Trunk?

    My problem is that I suspect that when connecting the SSD to vlan50, what makes the device get an IP from pool50 and not the old pool11?

    I haven't tried it yet because I'm a new employee. I'm afraid I might make a mistake and mess up the settings.




  • 8.  RE: Link pool dhcp with ssid

    EMPLOYEE
    Posted 6 hours ago

    First step is to get the client device on VLAN 50, that is easiest done by either allowing the VLAN configured on the VAP to apply or by using RADIUS to assign the VLAN.  You mention using a controller so I'm going to assume the traffic is tunneled.  For a tunneled WLAN the VLAN must be allowed to traverse one of the wired connections and the upstream switch has to be configured to span VLAN 50 where necessary.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------



  • 9.  RE: Link pool dhcp with ssid

    Posted 6 hours ago

    Thank you very much. ๐Ÿ™๐Ÿ™