Wired Intelligent Edge

Β View Only

  • 1.  Log CRC/FCS errors in SysLog

    Posted May 17, 2023 01:42 PM

    Hello all, I was looking at a way to send logs to a syslog server that would help identify if a port starts to show high crc/fcs errors. I know I can go into the switch manually and review it. But, I would like to find a way to be alerted when that happens. I attempted to look through the Logging guide and nothing stood out directly to me.

    Figured I would try here. Any help is apprecaited.



    ------------------------------
    Donald
    ------------------------------


  • 2.  RE: Log CRC/FCS errors in SysLog

    Posted May 18, 2023 01:40 AM

    is this for a CX switch?



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message


  • 3.  RE: Log CRC/FCS errors in SysLog

    Posted May 18, 2023 06:38 PM

    This is for an CX 8360v2, 6300, and 6200 😁


    Original Message


  • 4.  RE: Log CRC/FCS errors in SysLog

    Posted May 18, 2023 06:47 PM

    i am not sure about SYSLOG giving you that specific info, but you can have a NAE agent for that.



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message


  • 5.  RE: Log CRC/FCS errors in SysLog

    Posted May 23, 2023 08:23 AM

    If you look at this example:

    https://ase.arubanetworks.com/solutions/id/275

    It includes the following:

    • When rate of Rx CRC error packets (packets/s) is above the threshold:

    The agent status is marked as critical & syslog message displayed.


    I've tested these scripts and using the webui on switches it was easy to setup. I haven't tried it on all the models you mention and don't know the limitations. If NAE isn't available then a SNMP monitoring solution would work. We get alarms from switches to IMC (via standard syslog/snmp).



    Original Message


  • 6.  RE: Log CRC/FCS errors in SysLog

    Posted Jun 01, 2023 02:48 PM

    this is for a CX 8360v2, 6300, 6200


    Original Message


Related Content