Remote Access

 View Only
last person joined: 6 days ago 

Expand all | Collapse all

magic vlan

This thread has been viewed 54 times
  • 1.  magic vlan

    Posted Jan 10, 2021 01:02 PM

    I found it is assign ip to wireless client in the Instant,that is the Factory configuration.
    Is it only this way?
    By the way , can i modify or  delete  it.

    sorry,english not good

  • 2.  RE: magic vlan

    Posted Jan 11, 2021 04:28 AM
    To stop using the 'magic vlan' within the IAP​ and your clients​, you should select Network Assigned under Client IP assignment within your SSID profile.

    If you wish to use a different IP range and the IAP act as a DHCP Server, use the following:

    Craig Syme

  • 3.  RE: magic vlan

    Posted Jan 11, 2021 06:19 AM
    The magic VLAN is use when you do 'VC assigned addresses' and it is used mostly for guest users. The guest user's traffic will be source-natted on the VC, so you will never see that IP range on the network.

    The selection of the IP range is somewhat smart, as if you have a 10.x.x.x IP for the AP it will take another private IP range, like 172.16.x.x or 192.168.x.x; similar with one of the other private ranges.

    If you need full control, create your own VLAN and assign IP, DHCP, etc.

    Herman Robers
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.