Hi guys,
I thought i already started this but could not see any information so I thought I enter it again.
I have 2 AP375
This is what I want to acheive
internet -> Switch -> AP375 (PORTAL) -> AP375 (POINT)
both are running frimware 8.12.0.1_89864 (Digitally Signed Production build
I belve I am folloing the steps correctly as detailed as I did havea nother system working before.
plug both units to switch
let them get IP address in same network
turn Extended ESSID OFF
disconnect one unit (the non controller unit)
and plug it on with PoE only (no ethernet lan connection)
what I was seeing was the AP that was to be a POINT was a Client on the controller/Portal AP?
can someone please shed some light on what is happening and what step am I missing?
Is the SW/firmware version wrong?
Thanking you in advance
Klime
------------------------------
Klime Zengoski
Communications Engineer
------------------------------