Cloud Managed Networks

Hi,

I have few APs managed by Aruba Central configured in a group. Now I want to move one of the AP to a new group so that it takes new configuration for that group. How can I achieve this? Do I have to delete the device from the inventory and add again?

Thank you,

Use the icon in the lower right to change the group:



------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos
------------------------------

Original Message:
Sent: Dec 16, 2022 01:26 AM
From: Ajin Skariah
Subject: Moving a single AP from a group to a new group

Hi,

I have few APs managed by Aruba Central configured in a group. Now I want to move one of the AP to a new group so that it takes new configuration for that group. How can I achieve this? Do I have to delete the device from the inventory and add again?

Thank you,

here is the reference for it.
https://www.arubanetworks.com/techdocs/central/latest/content/nms/groups/move-iap.htm

------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------

Original Message:
Sent: Dec 16, 2022 01:07 PM
From: Dustin Burns
Subject: Moving a single AP from a group to a new group

Use the icon in the lower right to change the group:



------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos

Original Message:
Sent: Dec 16, 2022 01:26 AM
From: Ajin Skariah
Subject: Moving a single AP from a group to a new group

Hi,

I have few APs managed by Aruba Central configured in a group. Now I want to move one of the AP to a new group so that it takes new configuration for that group. How can I achieve this? Do I have to delete the device from the inventory and add again?

Thank you,

Hi Dustin,

I tried that before but its showing the virtual cluster and moving that will cause all the APs in the group to move. Please see below.  I want to move a single AP in the group to another group. I cannot see individual APs in the group.


Original Message:
Sent: Dec 16, 2022 01:07 PM
From: Dustin Burns
Subject: Moving a single AP from a group to a new group

Use the icon in the lower right to change the group:



------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos

Original Message:
Sent: Dec 16, 2022 01:26 AM
From: Ajin Skariah
Subject: Moving a single AP from a group to a new group

Hi,

I have few APs managed by Aruba Central configured in a group. Now I want to move one of the AP to a new group so that it takes new configuration for that group. How can I achieve this? Do I have to delete the device from the inventory and add again?

Thank you,

Put the AP into a different VLAN/Subnet. When it boots up with its new IP, then you should see it show up as a separate VC and you can assign it to different group.

------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos
------------------------------

Original Message:
Sent: Dec 17, 2022 03:50 AM
From: Ajin Skariah
Subject: Moving a single AP from a group to a new group

Hi Dustin,

I tried that before but its showing the virtual cluster and moving that will cause all the APs in the group to move. Please see below.  I want to move a single AP in the group to another group. I cannot see individual APs in the group.


Original Message:
Sent: Dec 16, 2022 01:07 PM
From: Dustin Burns
Subject: Moving a single AP from a group to a new group

Use the icon in the lower right to change the group:



------------------------------
Dustin Burns

Lead Mobility Engineer @Worldcom Exchange, Inc.

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2022
If my post was useful accept solution and/or give kudos

Original Message:
Sent: Dec 16, 2022 01:26 AM
From: Ajin Skariah
Subject: Moving a single AP from a group to a new group

Hi,

I have few APs managed by Aruba Central configured in a group. Now I want to move one of the AP to a new group so that it takes new configuration for that group. How can I achieve this? Do I have to delete the device from the inventory and add again?

Thank you,