Wireless Access

 View Only
last person joined: 2 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

MSM720 not passing DHCP

This thread has been viewed 0 times

  • 1.  MSM720 not passing DHCP

    Posted May 29, 2014 12:36 PM

    I have a client who has an MSM 720 with 10 APs running 6.3.0.0.  Clients on a VLAN'd SSID (VLAN 10) are not receiving DHCP addresses.  The AP system log is chock full of errors such as the following:

     

    May 29 11:33:07.304    crit <MAC:ADDR> dhclient: exiting.
    May 29 11:33:07.304    err    <MAC:ADDR> dhclient: Failed to get interface index for eth0.10 (No such device)
    May 29 11:33:08.163    warn <MAC:ADDR>monitord: Unexpected termination for process 'dhclient -cf /etc/maestro-dhclient.conf -d -hostname <AP_SN> -q eth0.10' [pid 1371, up for 1 sec(s)]
    May 29 11:33:07.120    crit <MAC:ADDR> dhclient: exiting.
    May 29 11:33:07.120    err    <MAC:ADDR> dhclient: Failed to get interface index for eth0.10 (No such device)

     

    I am interpreting this as the APs are not able to see VLAN 10 on the controller or that the dhclient.conf is corrupt.  If anyone can advise so we can get this school back up and running, I would appreciate it!


    #DHCP
    #msm
    #VLAN
    #720


  • 2.  RE: MSM720 not passing DHCP

    Posted Jul 24, 2014 11:40 AM

    Curious if you found any solution or troubleshooting tips?



  • 3.  RE: MSM720 not passing DHCP

    Posted Jul 28, 2014 09:39 AM

    We ended up RMA'ing the device as we were not able to get anything fixed.