Hello everyone,
I bought a used MSR3012 (JG409A) router for my lab. When I try to create a user, I get the message that there is not enough memory available.
I formatted the CF card and only loaded the boot and system image. I still get the error?
Does anyone have an idea?
Many thanks
[HPE]dis memory
Memory statistics are measured in KB(Available):
Slot 0:
Total Used Free Shared Buffers Cached FreeRatio
Mem: 735436 635172 100264 0 44 358112 13.6%
-/+ Buffers/Cache: 277016 458420
Swap: 0 0 0
[HPE]dis version
HPE Comware Software, Version 7.1.064, Release 6749P14
Copyright (c) 2010-2023 Hewlett Packard Enterprise Development LP
HPE MSR3012 uptime is 0 weeks, 0 days, 0 hours, 19 minutes
Last reboot reason : Power on
Boot image: cfa0:/msr3000-cmw710-boot-r6749p14.bin
Boot image version: 7.1.064P80, Release 6749P14
Compiled May 20 2023 15:00:00
System image: cfa0:/msr3000-cmw710-system-r6749p14.bin
System image version: 7.1.064, Release 6749P14
Compiled May 20 2023 15:00:00
CPU ID: 0x2
1G bytes DDR3 SDRAM Memory
8M bytes Flash Memory
PCB Version: 2.0
CPLD Version: 2.0
Basic BootWare Version: 1.82
Extended BootWare Version: 1.82